Long road, and it ends in the 9's!!
- Thread starter Pootie
- Start date
Gonna shake up some Sharts lol!The butt dyno going to spring a leak!!
No real update yet!!
I have been doing a lot of work myself. And at times it's hard to take pix.
But i cleaned the car up , Painted the floor and back 1/2 of the car "Matelic Grey". And got the front end buttoned up. Started fitting the bumper for the cooler.
I have been doing a lot of work myself. And at times it's hard to take pix.
But i cleaned the car up , Painted the floor and back 1/2 of the car "Matelic Grey". And got the front end buttoned up. Started fitting the bumper for the cooler.
Just went through the build, very good indeed! Subscribed for sure 
Can't wait to see more progress on this.
Can't wait to see more progress on this.
Thanks!!Just went through the build, very good indeed! Subscribed for sure
Can't wait to see more progress on this.
I'm always looking for sponsors!! lol (send over some free/cheap stuff and a nice big decal)
I need a few things..
dumptubes!! (i hope this is the right size for the Precision 46mm gates)
http://www.votionspeed.com/servlet/the-475/Mandrel-Bent-Stainless-Steel/Detail
Also need a few t-bolt clamps
x2
http://www.votionspeed.com/servlet/the-501/2.75"-T-dsh-Bolt-Clamp/Detail
x4
http://www.votionspeed.com/servlet/the-503/3.0"-T-dsh-Bolt-Clamp/Detail
x2
http://www.votionspeed.com/servlet/the-500/2.5"-T-dsh-Bolt-Clamp/Detail
Hump hoses
x1
http://www.votionspeed.com/servlet/the-619/3.0"-Silicone-Hump-Hose/Detail
x1
http://www.votionspeed.com/servlet/the-332/2.5"-Silicone-Hump-Hose/Detail
Reducers
x1
http://www.votionspeed.com/servlet/the-408/3.0"-to-2.75"-Silicone/Detail
x1
http://www.votionspeed.com/servlet/the-373/2.75"-to-2.5"-Silicone/Detail
And i have a few questions about these!! Might need a few fittings to button up my fuel system!
http://www.votionspeed.com/servlet/the-Anodized-Oil-Fittings/Categories
c.harrison24
New Member
WOW i just read all 24 pages and thats all i can say, cant wait to see some pics of the engine in the new shellfor the carpet- go to www.stockinteriors.com
should be in soon. Just been busy. I'm going to be moving in a month!
thank you sir. thats exactly what i was looking for
thank you. This build might not be too pretty for a bit. But it's gonna be hella fast (i hope) lol
nice build up. Good numbers on the dyno.
so your going to the mFactory shoot out right?
Yea the old one made goood power for what it was. But i'm trying to scare myself with this build. lolHoly hell dude! Your car is a beast!!!
When and Where is it!! I am kinda limited as far as traveling due to my New/Still growing Family!!so your going to the mFactory shoot out right?
But speaking of MFactory
This met me at work today
Finally my drivetrain stuff are coming in!!
Diff showed up to my job today.. gears,sleeves,carbon coated syncros got delivered to the house!! ;D :yes:
Tranny should be together in a day or 2, once i can get some time. Then all thats left is a skattershield and the motor can go in!!
Damn, almost 12 pound diff!!
thanks man
I got the Avid Solid Billet Pro mounts.
I assume you can get Avid mounts are most local speed shops. Or on the internet. Might even be a vendor on ClubCivic that can source them!
Contact Chris or Jay at XENOCRON.COM
If not call them up, and they will tell you a dealer near you.
Number is 905 820 2843 ask for Franklyn
amazing build thread man! im currently building a gsr for boost although mine wont make near your numbers haha. cant wait to see more!