ok so im getin a EG hatch for cheap and got a wrecked SI B16 im gonna dump the B16 into the hatch...do i need to change up some mounts?
not completely necessary but a great investment, if you are sensitive to vibration and are using it as a daily driver get ones with soft bushing, i got Innovative 75a's for my h22 and it vibrates alot, but i dont mind, a friend of mine has innovative 60a's for a b series and they have a softer bushing and there is no vibration.ok so get aftermarket mounts lol thanx mang
I did the same swap in my 4dr civic ex but its a 1st gen sir b16 motor, if im correct the motor that you going to put in your car is a 99-2000 civic si b16 motor. if this is true you will have to change the driver side mount to a 94-2001 integra mount and the 6gen civic upper tranny mount is also different so you will have to change it too, but if your in a budget then you can also use your stock upper tranny mounts off of your SOHC will work too and you will also need to use a 94-2001 integra back mount ( the L bracket as most people known as) and for the two other mounts it will fit too.ok so im getin a EG hatch for cheap and got a wrecked SI B16 im gonna dump the B16 into the hatch...do i need to change up some mounts?