unix4linux
New Member
K24A4 Block w/ K20A2 Head
I have a K24A4 block with a K20A2 head that I was building for my RSX. I decided to work on another project and selling this build. I am selling everything for $6,000 OBO shipped or parted out as follows: bottom block is parted as one and head is parted out as one. OR, I am willing to separate from the bottom block as follows: block w/ everything except pistons on its own and rods on its own.
The head I am willing to part out as: head with complete valvetrain and everything else OR cams on its own.
Details of bottom and head:
K24A4 bottom: $3,000
• Stock crank
• Complete bottom end
• All bolts and nuts
• Stock pulley
• Oil pump
• Oil pan
• ACL bearings and thrust washers
• CP Pistons 9.0:1 89MM
• Eagle H-Beam Rods
• Golden Eagle HD Sleeves with copper o-rings
• Honda OEM head gasket 89MM
K20A2 head: $3,000
• Skunk2 Stage 2 camshaft
• Rocker assembly
• All lost motion with springs
• Race spec port and polish (maxed)
• Supertech intake and exhaust seals
• Valve job
• Supertech intake and exhaust valve guides
• Supertech keepers
• Brian Crower oversized intake and exhaust valves 1mm
• Brian Crower valve springs and retainers
• Valvecover
• Ignition coil
• OEM camgears
• All sensors for head
• Head was milled slightly just to clean the surface
I have a K24A4 block with a K20A2 head that I was building for my RSX. I decided to work on another project and selling this build. I am selling everything for $6,000 OBO shipped or parted out as follows: bottom block is parted as one and head is parted out as one. OR, I am willing to separate from the bottom block as follows: block w/ everything except pistons on its own and rods on its own.
The head I am willing to part out as: head with complete valvetrain and everything else OR cams on its own.
Details of bottom and head:
K24A4 bottom: $3,000
• Stock crank
• Complete bottom end
• All bolts and nuts
• Stock pulley
• Oil pump
• Oil pan
• ACL bearings and thrust washers
• CP Pistons 9.0:1 89MM
• Eagle H-Beam Rods
• Golden Eagle HD Sleeves with copper o-rings
• Honda OEM head gasket 89MM
K20A2 head: $3,000
• Skunk2 Stage 2 camshaft
• Rocker assembly
• All lost motion with springs
• Race spec port and polish (maxed)
• Supertech intake and exhaust seals
• Valve job
• Supertech intake and exhaust valve guides
• Supertech keepers
• Brian Crower oversized intake and exhaust valves 1mm
• Brian Crower valve springs and retainers
• Valvecover
• Ignition coil
• OEM camgears
• All sensors for head
• Head was milled slightly just to clean the surface
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/c971b06e.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/6a9c8c72.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/3d6e1dbe.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/6421833e.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/ebbe4c1f.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/c4765d3c.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/14b9c1c8.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/0dec22dd.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/c089bf57.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/960e31ac.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/c6cc89e7.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/ebc3336c.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/a3f3a63e.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/b6be5be2.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/f75eb55d.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/1cfdd013.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/d6d20246.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/6cc3bf39.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/9caa4f5d.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/d37e23a5.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/4e488807.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/126e6e16.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/a429ff22.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/92bec8be.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/cfbdb47b.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/879e768b.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/14b95f95.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/2f2bfc42.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/f054f3d8.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/d6519d2c.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/c4c34dab.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/2c3eb1fa.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/92581bf9.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/b165b683.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/63772ec2.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/fcd0c004.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/8510f51f.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/b6d15adf.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/78f6375e.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/5b73620c.jpg)
![](http://i159.photobucket.com/albums/t156/unix4linux/K24_K20%20Build/5de21ab4.jpg)