chipping paint! what to do?

[Fast]

The paint below the window is chipping, should i sand off and re-paint?

 

[Mysteryemotionz]

I used a wire a brush to finish removing the paint. I then hand sanded with a fine grade sand paper. I then clear coated the area. Imo the brushed aluminum looks better then the black

Sent from my SPH-D700 using Tapatalk

 

[Fast]

ok ill give that a try

 

[Mysteryemotionz]

The clear coat on at the end is necessary or the trim will begin to rust

Sent from my SPH-D700 using Tapatalk

 

[Fast]

Ok, will just spray on clear coat work?
and how many coats should i do?

 

[Mysteryemotionz]

That's what I used. I just taped everything off when doing so. I than did 2 coats of clear.

Sent from my SPH-D700 using Tapatalk

 

[evilrilla2]

they also sell door trim paint at the auto store, also you could use plasti-dip with glooss enemal. both look look.

 

[emerican]

^ this is whats getting done to mine very soon cause its starting to chip a tiny bit gonna nip it in the bud before it gets bad