complete k20a2 220whp set up for eg/dc2

Status
Not open for further replies.

vtec2.0

New Member
5+ Year Member
#1
Motor: 2004 Acura Rsx-S with 24k on it.

K-series Parts:
EVERYTHING IS BRAND NEW
-Brand NEW Primary o2 sensor
-Hasport EG/DC2 Mounts
-Sparkks Conversion Harness
-Karcepts Radiator Re-locator bracket
-Karcepts Shifter Box kit
-Karcepts A/C & P/S removal kit
-Hondata K-Pro
-Driveshaft Stage 2.9 Axles
-Golden eagle Black fuel rail
-Earle's Stainless steel Braided Fuel lines
-R-Crew Stainless steel Headers (THESE ARE PURE SEX!)
-AEM Fuel Pressure Regulator
-Custom OEM clutch Hardline.
-AEM RSX-S Cold Air intake modified to make it work

Everything for $8000

$7,500 without kpro

I've spent $10,000 on this set up alone...so if u have a problem with my price then kick rocks. Thanks

I can install everything in your eg for $1000 more. Thanks.

Herbert @ gmotorsports

Located in waldorf,md

The car is still intact and you can drive the car if you want to make sure everything is functioning properly.

Lmk.

Prices are firm no trades and no parting out! So don't ask!
 

franklin-hid

your moms boyfriend
Registered VIP
5+ Year Member
#2
Motor: 2004 Acura Rsx-S with 24k on it.

K-series Parts:
EVERYTHING IS BRAND NEW
-Brand NEW Primary o2 sensor
-Hasport EG/DC2 Mounts
-Sparkks Conversion Harness
-Karcepts Radiator Re-locator bracket
-Karcepts Shifter Box kit
-Karcepts A/C & P/S removal kit
-Hondata K-Pro
-Driveshaft Stage 2.9 Axles
-Golden eagle Black fuel rail
-Earle's Stainless steel Braided Fuel lines
-R-Crew Stainless steel Headers (THESE ARE PURE SEX!)
-AEM Fuel Pressure Regulator
-Custom OEM clutch Hardline.
-AEM RSX-S Cold Air intake modified to make it work

Everything for $8000

$7,500 without kpro

I've spent $10,000 on this set up alone...so if u have a problem with my price then kick rocks. Thanks

I can install everything in your eg for $1000 more. Thanks.

Herbert @ gmotorsports

Located in waldorf,md

The car is still intact and you can drive the car if you want to make sure everything is functioning properly.

Lmk.

Prices are firm no trades and no parting out! So don't ask!
so everything isnt "new"?


well beig that im K myself n that list looks like my setup.....its pretty steep....i paid ur asking price with kpro AND installed.


bump i guess
 


vtec2.0

New Member
5+ Year Member
#3
so everything isnt "new"?


well beig that im K myself n that list looks like my setup.....its pretty steep....i paid ur asking price with kpro AND installed.


bump i guess
you paid to your stuff done.

A tuned all motor set which includes motor,trans,axles,shifterbox,karcepts everything, fuel system,header,harness....etc...for less than $8000?? Maybe for the parts only.

A gsr swap costs 2500-3000 $...

But on craigslist.com they sell for $1000-$1500 what's your point??

Post your set up and pics to back up...otherwise build your own...don't pay to get it done.
 

rey_boricua

2000 EM1 B16A2T
Registered VIP
5+ Year Member
10+ Year Member
#4
some people in general pay to get it down because they might not have the time or mechanic skills to do things with their car.
 


franklin-hid

your moms boyfriend
Registered VIP
5+ Year Member
#5
you paid to your stuff done.

A tuned all motor set which includes motor,trans,axles,shifterbox,karcepts everything, fuel system,header,harness....etc...for less than $8000?? Maybe for the parts only.

A gsr swap costs 2500-3000 $...

But on craigslist.com they sell for $1000-$1500 what's your point??

Post your set up and pics to back up...otherwise build your own...don't pay to get it done.
i got a k20a2

I literally took a "rolling" shell to certified racing here in nj... a week later picked up a running k20a2 with kpro,rcrew headers, intake,aem fuel pressure regulator, golden eagle fuel rail, plug n play harness,braided stainless steel lines, every karcepts part u listed,mounts, etc...AND i got a FULL wire tuck. battery relocated to the trunk, fusebox under the dash, harness through fenders,etc

you get where im going

Everything LEGIT FROM A SHOP ans INSTALLED..WITH PAPER WORK and everything was NEW, except the motor(obviously)....wasnt used by anyone b4 me....literally fresh out the plastic/box


i wasnt knocking you. just saying 8k for the swap plus 1k for install was alittle steep..u said u dont care..but u obviously do.

IDK if thats cheap in MD but up here...thats STEEEPPPPPP
for 9k i could of got my swap plus stage 2 cams,RBC intake manifold w/gasket and TB spacer,and a wideband


check my sig n u can see the whip...aint gunna sit here n bullshit u... i know what i got n i know what i paid

Also if u own a shop, awesome way to come poff to possible new customers.

like i said i was knocking just let u know that it was alittle high

that all

some people in general pay to get it down because they might not have the time or mechanic skills to do things with their car.
EXACTLY

I dont own the tools nor the space... so did the next best thing..Even tho im capable of it just wasnt possible to do it alone
 

rey_boricua

2000 EM1 B16A2T
Registered VIP
5+ Year Member
10+ Year Member
#10
thank you thank you

see my sig for more awesome-ness..lol

he called me out..all i said was that was alittle steep... :(
dont sweat it you stated what you thought trying to help ole boy out... oh well

anyways dont mean to thread jack GL on your sale
 
Status
Not open for further replies.




VigLink badge