I just bought halo projector headlights from Procivic.com http://www.procivic.com/pages-product_car_part_info/category-71_130/product-852/index.html and i dont know how to hook up the halo rings?? can anyone help?
^^ I have never heard of that. Me and a couple of my friends all have halos and they had there own power source so you could see them day or night. Its been a long time since i have installed them but i believe i tapped them in to my parking lights power source.You don't need to hook them up, the rings come on by themselves from the reflected light when you turn your lights on. You wont be able to see it during the day but you will at night or when its dark.
^^^ I agree... For one they are nothing but trouble. me and my friends have had nothing but trouble with the halos and leds going out. Also if you get HIDs with a temp over 8K then the projector lenses will burn the inside of your lens which over time will turn them yellow.why would you pay all that money for those?
What?^^^ I agree... For one they are nothing but trouble. me and my friends have had nothing but trouble with the halos and leds going out. Also if you get HIDs with a temp over 8K then the projector lenses will burn the inside of your lens which over time will turn them yellow.
red, green, and red?Hey, I'm going to help you
I have had halos for about three years now with no problems. The wiring is not difficult.
The best and easiest way to hook up your halos is to splice them into your parking light. This way, whenever you turn your lights on one click to parking lights, only your halos (or your turn signal area too) will light up. Then, whether you turn on your lights all the way, either with low or high beams, both halos will be on.
When you open your hood, take a look at the wires running down to the turn signal bulb. You'll see red, green, and red. The green wire is the one you want to splice your halos into. The halo wires themselves are the super-thin wires set apart from the wires running into the plug.
Just a little nomenclature for you to help you understand the installation process: the black box you plug your headlights into is called a "pig butt." - To hook up your wires for your halos, you have to hook up your either your positive or negative halo wire INSIDE the pig butt and your other wire onto the green turn signal wire. The pig butt has three or four clips on it that are easily opened with a flathead screwdriver. Inside you will see metal connectors where the pig butt connects into the car's wiring.
I honestly can't remember if the negative or positives go into the pig butt of vice versa. Just guess and check, it can only be one of two ways
Uh, no.Also if you get HIDs with a temp over 8K then the projector lenses will burn the inside of your lens which over time will turn them yellow.