New seats are going to have to wait 
How to swap EP3 seats into EM2's
- Thread starter LatinEM2
- Start date
bumping this so i can find easier
i know its old
bite me
i know its old
bite me
lolz, Ok old thread bumper.. heres what i did:
as said tey bolt up with 3.. so I went and cut off the tabs on the EP3s and my old EJ8 seats.. measured twice and cut once.
then welded the old seat tabs to the EP3 seats..
the important one is the seatbelt one... you want to have that one in case of an accident so you dont go flying thru the glass in a crash
as said tey bolt up with 3.. so I went and cut off the tabs on the EP3s and my old EJ8 seats.. measured twice and cut once.
then welded the old seat tabs to the EP3 seats..
the important one is the seatbelt one... you want to have that one in case of an accident so you dont go flying thru the glass in a crash
Daamn the picture of the EP3 and the normal seat make me want EP3 seats sooooo bad.
I haven't swapped any rails. I got the passenger side bolted with all 4 bolts. Having trouble withe driver side, I think I bent the rail.