Looking for stock y8 dyno graph

[TheWingMang]

Hey, I've been trying to find one for a few days, no luck, hoping someone can help.

I'm looking for a dyno chart (or two separate) of a stock D16Y8 with vtec completely enabled and completely disabled. If anyone has or can find lemmie know. Thanks

 

[12.8:1 Ls/vtec]

106 whp. normally 118 with I/H/E

http://www.supercharger.com/CustomerService/DynoChart.aspx?Chart=civic96ex.gif

 

[JiuJitsu_greg]

106 whp. normally 118 with I/H/E

http://www.supercharger.com/CustomerService/DynoChart.aspx?Chart=civic96ex.gif

nice find !

 

[jdm98coupe]

the ex model civic which has the d16y8 come stock with 127 i thought? thats what ive seen in the past.

 

[Szady]

the ex model civic which has the d16y8 come stock with 127 i thought? thats what ive seen in the past.

It does. If you look at the stock graph, its at about 127hp.

 

[Phantom Civic]

It does. If you look at the stock graph, its at about 127hp.

The top graph is torque and the bottom is horsepower.

A stock ex does have 127hp, but thats at the crank. It has around 100whp.

 

[xxsenceo89x]

dont you loose 15% or somthing?

 

[watisjdm]

yes u prolly have around 99.8 or 100 something hp

 

[chadi]

I'm looking for a dyno chart (or two separate) of a stock D16Y8 with vtec completely enabled and completely disabled. If anyone has or can find lemmie know. Thanks

hooking up a vtec controller?
and that graph was for a regular run...hes looking for one where vtec is set at 1K, so throughout the whole pull vtec is engaged, and one where its set at 10k where through the pull vtec never engages...then put the two graphs together and where ever the graphd cross...set vtec there...