Alright so I got a good deal on the Skunk2 Rear Lower Tie Bar and I've been wanting one so I went ahead and got it, even though I've been reading that they don't really do all that much, but at least it looks good >` don't mind the dirty car... and btw in the pictures the big "washer" things are actually on backwards, i had to switch them around once i got one side on the bigger one should be in between the tie bar and the chassis
what you'll need:
Jack
Jack Stands
Socket Wrench
14mm socket
17mm socket
about 30min of time
what you'll need:
Jack
Jack Stands
Socket Wrench
14mm socket
17mm socket
about 30min of time