I searched the forums on these nissin calipers and all I found was suggestions. No help on installing them. I have the stock integra calipers. Their going on a 4 door 95 civic.
nissin brake calipers installation help
- Thread starter 95 modified
- Start date
are you talkin about the spoon calipers??
you may be able to bolt up the whole caliper depending on your model type. If you have ex/si it should be straight forward, if its dx/lx, you might have to swap the whole knuckle.
youll need integra hubs to install the calipers, the civic hubs are too small and usually about 1/8" off fom both holes bolting up.
the only way theyd bolt diresctly on is if u had a 94-95 car with abs. but then youd already have an integra braking system
now if u already have the hub, what help do you really need a good mechanic can just tear anything apart and put it back together. its easy. just unbolt the factory hub, using a pickle fork to separate the joints, add the new peices put the nuts and bolts back on and hook up the brake lines, its really that easy.
the only way theyd bolt diresctly on is if u had a 94-95 car with abs. but then youd already have an integra braking system
now if u already have the hub, what help do you really need a good mechanic can just tear anything apart and put it back together. its easy. just unbolt the factory hub, using a pickle fork to separate the joints, add the new peices put the nuts and bolts back on and hook up the brake lines, its really that easy.