Prices include 3% paypal fee. Price is not "shipped" unless indicated. All parts have less than 2000 miles on them! No dibs, but you can hold the item with a non refundable down payment.
1. Gator Axles......$450
-700+whp capable
-If you want exact details, contact greg at GO-AUTOWORKS
-This is a comparison picture, bottom is the gator
2. Autometer Elec. Cobalt Water Temp Gauge......$52shipped
3. Ebay F&R Strut Bars......$30
-look to engine bay pic above for picture of the front bar
4. Vision Amber Smoked Corners......$20shipped
-Posts on pass. side are broken off, see post #5 for pics.
5. AVID Billet Motor Mounts......$180
-I need your stockers!
4. Injector resistor......$20 shipped
-from an 89 ef
-exactly what you need for those low impedence injectors
5. D16z6 Shortblock......Make offer, no shipping
-around 100k miles
-only comes with wuts pictured
-needs to be honed and could use a hot tank
6. Make Offers on:
-z6 a/c compressor
-z6 tensioner
-z6 oil pickup
-z6 oil pump
-dumptube
-oil fill cap
-t-belt cover
-headbolts
-rear main seal
1. Gator Axles......$450
-700+whp capable
-If you want exact details, contact greg at GO-AUTOWORKS
-This is a comparison picture, bottom is the gator
2. Autometer Elec. Cobalt Water Temp Gauge......$52shipped
3. Ebay F&R Strut Bars......$30
-look to engine bay pic above for picture of the front bar
4. Vision Amber Smoked Corners......$20shipped
-Posts on pass. side are broken off, see post #5 for pics.
5. AVID Billet Motor Mounts......$180
-I need your stockers!
4. Injector resistor......$20 shipped
-from an 89 ef
-exactly what you need for those low impedence injectors
5. D16z6 Shortblock......Make offer, no shipping
-around 100k miles
-only comes with wuts pictured
-needs to be honed and could use a hot tank
6. Make Offers on:
-z6 a/c compressor
-z6 tensioner
-z6 oil pickup
-z6 oil pump
-dumptube
-oil fill cap
-t-belt cover
-headbolts
-rear main seal
