Update

TAGs95CivicEX

Tom Foolery
5+ Year Member
Just a little update on my car


1995 Honda Civic EX
D16z6
Bored +.010 and posted block
SRP 9.0:1 forged pistons
Tuner Toys forged rods
Micro Polished Crank
Balanced
Port and Polished Cylinder Head
Ferrara Valves
Skunk II Intake Manifold
60 mm TB
Cheap Short Ram Intake
Cheap 4-1 Header
Cheap Fart Cannon
The last three will be replaced shortly with my turbo setup.
Centerforce Dual Friction



17" ASA wheels
205/40/17 Nitto Neo Gens
cheap coil overs
cheap strut tower bars upper and lower, front and rear


S10L7
ZR240
JVC headunit
Stinger 1 Farad Capacitor









 

TAGs95CivicEX

Tom Foolery
5+ Year Member
few more

After the paint job, turns out we rushed things to much and something messed up in the clear so we only had enough left to make two coats go on, the first batch screwed up or something not sure what happened, either way she's getting painted again in the winter. This is how she sits now at least. The taillights and the headlight/corners are being replaced very shortly. Boost is in her near future, I'll keep yas updated















-TAG
 


Jezek

No Avatar FTW.
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
minus the tails....I must say, it's pretty clean :what:

ESPECIALLY the bay.....nice job on that man :thumbup:
 

racing_kid

take that sucka!!!!!
Registered VIP
5+ Year Member
i like the car but i dont like the tail lights..

looks pretty good non the less..=)
 


TAGs95CivicEX

Tom Foolery
5+ Year Member
Jezek said:
minus the tials....I must say, it's pretty clean :what:

ESPECIALLY the bay.....nice job on that man :thumbup:
racing_kid_05 said:
i like the car but i dont like the tail lights..

looks pretty good non the less..=)


\/\/\/\/\/\/\/\/ Way ahead of yas, I can't stand them either, I kinda like them at night time but day time they make me throw up in my mouth

TAGs95CivicEX said:
The taillights and the headlight/corners are being replaced very shortly.

-TAG
 

chimmychongaz

'92 Civic POS Edition
5+ Year Member
NOICE!

That is super clean. How much whp/trq are you looking at getting when you get the turbo set up on?
 

JL

Doodoo Brown Member
Registered VIP
5+ Year Member
10+ Year Member
Damn, that's a clean ass bay.
 

TAGs95CivicEX

Tom Foolery
5+ Year Member
Hoping

I'm Hoping to get 350 whp plus. I have to find that fine line between big power and daily driving power, I won't drive around day to day with the boost that high but at max boost I'd like to be running 350 whp. I don't have the complete turbo set up yet. The key component ie the turbo is still up in the air. I was thinking a T3 T04-E Turbonetics ball bearing. I know a fella that installed one and it was just to much lag for him, and on the same motor. But he didn't have a ported head, a big exhaust or a big intake and TB, also his was not ball bearing. So I'm hoping that I can run a T3 T04-E ball bearing and be able to run a small amount of boost and still have it spool descently quick. What does everyone think, is that turbo to big for my little D. I think it should work with the right tune and proper setup. but then again I'm a Forced Induction Noob

-TAG
 

Tom

honda.co.jp
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
Nice and clean looking, especially the engine bay.
 

TAGs95CivicEX

Tom Foolery
5+ Year Member
projectors

Alright I know most people on this site don't like projector headlights, but I think these look really nice on my car. My old corners were ugly, and the headlights just stuck out on such a black car I think. As of now I have the halo's hooked up. but I'm still not sold on them and may just leave them unhooked. The lights are well constructed and garenteed to be water proof. They are much brighter than my orignal lights that is for sure.

Pics.... Be Gentle on me.



high beam




low beam




signal light


just halos


-TAG



God I hate photobucket. and dial up I'll fix all the picture sizes later
 

TAGs95CivicEX

Tom Foolery
5+ Year Member
trneds

Yeah they aren't really the style now I know. I've never been much for building my car to meet the "trends" that everyone else is doing. I've always liked these headlights, and think they look sharp on the right car. If I could design my own and build them a little differently maybe it would be another story, but these are the nicest ones I could find.

-TAG
 

JDEF93EX

New Member
5+ Year Member
That engine bay is freaking immaculate!! Car looks great! I like the stock headlights better, but as long as you are happy with it that's all that matters.
 

EG-Owns you

Twin Tech Owns Your s**t!
Registered VIP
5+ Year Member
10+ Year Member
15+ Year Member
god damn is that clean engine bay holy cow the only thing i dont really like is the rims but god damn its clean all together good job and nice build
 

kangaroo

..........UPS.........
Registered VIP
5+ Year Member
10+ Year Member
Should have gone with the TYC projectors.

Clean ass engine bay!!!:thumbs up
 


Top