Search results

Check your head gasket with a leak down test

Factory Radio?

Glad to hear it's all fixed

Welcome and nice starting point it looks virgin

I forget where I grounded mine but I do remember the bolt i used was already there in the trunk area behind the carpet to trim

Replace or test the temp. sensor it may be faulty

While you have the valve cover off might want to check the calve lash

Is the CEL on, and if so what codes, so we have a idea of what the computer is telling you. Most auto parts stores will read them for you.

Crank that box up thats the best part about the electronic trucks, almost bout mt buddies 2000 5 spd cummins, At level 6 on his box it was too quick for a six thousand pound truck

Sweet truck and for you all asking old vs new early 98 and older cummins were mechanical engines and to get away from crappy auto trans just get a manual. Mines a 96 Dodge Cummins Auto 197xxx and counting

The EX model has sportier gearing than the other models ie. higher revs on the freeway, but faster acceleration. You don,t have cap and rotor, this is a coil on plug engine. Try cruising about 70.

Welcome

Nobody? Anybody?

I get 29 or 30 in town and road trips 40-41

The beater. New Challenge....in front of a school

no you cant just run a bead of weld across it. It will not have the flex it needs to move slightly and will crack the weld or around it.

Find the best welder/fabricater you can and have them build/rebuild that area or scrap it. Don't unload that dangeous garbage on someone without telling them

Welcome to cc

Welcome to cc

New challenge in front of a body of water (River, Lake Pond, ocean)