Search results

since the last update: Suspension: BC Racing Hard Race front and rear camber kits MFactory lower ball joints Hard Race lca new bike rack roof rack fairing kit vision low seat rails building a new b18cr for it now

very very good write up :) what are the bearings worth in your state?

dayum what a fun roof rack setup lol very clean build thread :)

you'll need the short roof adapter bars as well for the thule kit to work properly, along with the civic specific model feet that sit in your rubber lining very decent kit for the money and easy to remove and reassemble without damaging the car

now that is by far the most comprehensive pic I've seen in months! thanks very very much :) looks like dodge forging, just had a look not cracked lol (phew)

had an oil leak from the oil filter (as it has an aftermarket sandwich plate on there, sorted that with a liberal amount of hondabond on both plate and filter (had to try it)) but that was a few days ago and everything was cleaned up. pic of oil pressure switch? :) as I was seeing oil...

I sealed it using hondabond, gave everything a pretty thorough clean to ensure all of the old gasket was indeed off and tightened the bolts in the manner specified in the haynes manual (start from the middle and work from side to side in a criss cross fashion three times slowly working up to the...

thoughts, just changed the sump gasket and now this small leak lol possible rear main seal?, engine has 268,000kms on it, doubtful that the seal has even been touched seeing as it's still on its oem clutch lol

wasn't the bolts that were leaking, used thread tape on those, was just the gasket. It flattened to about the same level the sump gaskets do. So, after I posted up I removed the fresh oil (only drove it for about 3 days), filter (threw it out as I have alot of filters), and firstly checked the...

Ok, so awhile ago I bought an aftermarket sandwich plate, you know just to get a reading of the oil pressure etc. Anyway the damn thing is leaking atm, was considering using rtv or hondabond on the gasket in conjunction with it to make it seal better do others experience these leaks, I'm...

I have a 1996 ej8 coupe and already have fitted the oem jdm foglights to the front, managed to track down a new rear fog light kit from a buddy. Figured out where and how to cut the bumper, just curious in terms of wiring as I don't get a diagram and harness with the kit, have people been able...

all I've done to it lately: painted the tappet cover modified an aftermarket 3" hx intake arm to fit the EJ8 (seller sent me the worng item on ebay, lol) bought an intake headlight for drags next: install the mfactory short shifter mfactory drain bolts ES shifter bushings

fits like a dream, the oem cover fits on well to deter bugs on the way to the drag / or sprint track

bought 99' ITR black mats for mine 6 months ago, very happ, same fitment for front and rear :) under $200aud new from the dealer :) as they have stoppped making civic mats for some stupid reason lol

as part of competition racing, you need 2 points of bonnet (hood) security points, oem latch and hood pins or straps these will get you fined where I live unless they are the flush (jhp style or speco style) good added security, hence when my conversion is in I will be having some :)

x2, I got mine from a CTR that was being wrecked from a mate in K.L. Im keen to see my electrician do it, taking them to the painters today and leving them there to get painted Cypress Green. Then the following week, off to the electrian, I've brought weird things like this to him in the...

notice the top bolt holes, Ive seen members on this forum and others use these holes as mounting in the past, just wonder what type is all for bling factor :)

get the wheel and count the spline numbers I have a euro-r steering wheel on mine now lol but I cant see the 92 model fitting as its the same yr as the eg/teg styles and they dont fit eks lol the wheels Ive seen fit onto an ek are: EP3R JDM DC5R DC2r with an ek9 hub swap ek9 s2000...