Here's a little how-to I made on how to remove a key tumbler from your ignition. This should be helpful to anyone who's had a car stolen, or broken a key off in the ignition
Here's how your ignition would sit if it was in your car:
==========================================
Step 1: Remove the TORX T-30 bolt from the bottom of the ignition.
Step 2: Turn the key to the first line (Accessory) and pull away from the ignition.
Step 3: Press the small black dot on the top with a pick or mini screwdriver.
Step 4: PULL
And there you have it.
Here's how your ignition would sit if it was in your car:
==========================================
Step 1: Remove the TORX T-30 bolt from the bottom of the ignition.
Step 2: Turn the key to the first line (Accessory) and pull away from the ignition.
Step 3: Press the small black dot on the top with a pick or mini screwdriver.
Step 4: PULL
And there you have it.