Ill sub into this!
Mugenn's 98 Ex Build -Ontario, Canada-
- Thread starter Mugenn_civic
- Start date
Haha fair enough, yeah can't argue with that logic lol, ohh welli guess i got my first and last chunk of uncle ben's for the car
Sweeet, tomorrow I'm finishing up some brackets, almost done... i'm a phucking clutz
Sold my old set of 17x7.5 Rota Subzero rims and picked up 1 3/4 sets of rims.
3 x Buddy club P1's - 15x?
Full set of Work RSB's - 15x7
3 x Buddy club P1's - 15x?
Full set of Work RSB's - 15x7
Different front and back with a spare for each or do you plan on ordering the missing two?
Maaaybe, if i can get a good set of slicks ill put two on the buddy clubs only for track days, but for now I'm going to get a nice set of tires and rock the Works daily, it would bug me having two different rims on everyday.
Yeah I'm going to take my time and see if an odd one pops up, if not I'll just buy a new one and refinish the ones I have now, they are kinda beat up, were piled up in a garage so the decals and stuff need to be replaced
Nice dude!
Stupid hood latch...
Much better
I got it from a local retailer after finding it on CC :http://www.clubcivic.com/board/showthread.php?t=201969
Master cylinder brace came in
Basically how it should look after install:
Finished off my Big 3 ground upgrade
Much better
I got it from a local retailer after finding it on CC :http://www.clubcivic.com/board/showthread.php?t=201969
Master cylinder brace came in
Basically how it should look after install:
Finished off my Big 3 ground upgrade
Plastidipped my bumper yesterday & got a few pics at dinner with a few friends
"Never seen winter, garage stored" 
Sent her to the shop to get fresh gaskets for the GSR I/M, new injector, vtec solenoid gaskets and new silicone vacuum lines for the IABs.
Test fitted a Integra GSR AEM CAI on my car to check if it would fit, turns out only one small metal tab needs to be moved to make it work!
Removed the BYS to test fit some goodies and send in for paint
(ordered wrong thermostat, so didn't bother keeping it)
Last week my driver's side fender liner decided to introduce itself to my tires..
aaaaaaaand fixed.
Since the weather cooperated yesterday i finally cleaned out the interior
Sent her to the shop to get fresh gaskets for the GSR I/M, new injector, vtec solenoid gaskets and new silicone vacuum lines for the IABs.
Test fitted a Integra GSR AEM CAI on my car to check if it would fit, turns out only one small metal tab needs to be moved to make it work!
Removed the BYS to test fit some goodies and send in for paint
(ordered wrong thermostat, so didn't bother keeping it)
Last week my driver's side fender liner decided to introduce itself to my tires..
aaaaaaaand fixed.
Since the weather cooperated yesterday i finally cleaned out the interior
Looks great! Well im sure it will once its cleaned up lol. Just pull those liners out!
Early morning shot of the new cluster
& began stripping down the rims for a fresh paintjob, still deciding between bronze, gunmetal, or white.
