More Parts
So yesturday I ordered more parts from Manchester Motorsports. Thanks for the help Doug if you are checking this out!
- Spoon style paintable spoiler with led
- CTR front and rear lip
- a few interior pieces
- driver side rear window trim
- CTR grill
- hood release wire
Parts
Hood Release Cable
Interior put back together a bit. Starting the hood release cable install
Here is the broken cable end which snapped when someone pulled on jammed up cable
-Start by removing the panel which is clearly missing in this picture and on the floor in the last picture. It is held on by 2 plastic pins which are very obvious
-Next unbolt this end of the cable
If you are looking at the latch you will see the cable comes from the driver side curls back around and enters the latch from the passenger side. This cable is held in place by a bunch of clips which you can see poking through the metal in this picture. There are also 2 clips in the fender well which can be reached by just taking off the fender liner. ( I HATE taking off fender liners) I tried to remove the cable from the latch without removing the latch from the car. It is much easier to just undo the 3 10mm bolts.
Latch removed
Mine wasn't working great because of how gross it was!
Lots of chemicals and elbow grease later
A WORKING LATCH AND CABLE
Side Molding is coming off. Not so easy but it has to go!
Rear lip just hangin
I went with ABS Dynamics stuff because I have heard good things about there fitment. This came with complete mounting hardware for $89.95 so I am happy.
The rest of the parts are on order and I will pick them up next Wednesday.