Alright so I thought this swap might be worthy of a little build thread.
I chose the H22 because... well its different right? And of course the extra torque seems quite appealing!
So I ordered the engine and it should be here next week.
I have yet to get the axles and figure out what I will be doing with the wiring.
These are the few things I will be installing with the engine.
competition ultralight flywheel
competition stage 2 clutch kit
ESP header
Greddy SP2 catback (tanabe now cause greddy is discontinued)
Well I don't know what else to say... oh yea, this is my first swap! I bought another hatch in case the swap took extra long. I also need my car for work so yea...
Onto the pics!
bad photo
just have the axles left
my ESP mount stuff, ESP FTW!
09/17/07
got the engine out today
will proceed to clean it up and maybe get my new subframe in
this is big for me, my first engine i ever took out, hahaha
09/25/07
yesss, finally picked it up today
it was a pain in the ass, i had to go to customs at some random building then to another warehouse to pick the engine up >.<
thumbs up to Hmotorsonline, i checked everything and it all seems good. they even took the TPS sensor off so it wouldnt get mashed... maybe every company does this? i wouldnt know
09/29/07
today me and my dad tried fitting the h22 in to get to get it positioned to weld in the passenger side mount and lemme tell ya... it is a PAIN in the ASS taking that engine in and out. you guys were right, a lil more banging here and there then i expected, nothing a torch and a good sledge hammer couldnt handle though. plan on getting that mount welded in tomorrow since after 6hrs today we finally got the engine mounted correctly. was gunna take pics but the camera wasnt working and my dad wanted to stay focused on the job. will take some tomorrow.
09/30/07
here are the pictures.
fitting the engine so we know where to put the passenger side tranny mount.
taking the mount on
the engine is really tight getting in and out but we've (my dad and i) probably taken it in and out around 6-7 times >.<
Thanks for looking, updates will come weekly maybe? Any comments welcome.
I chose the H22 because... well its different right? And of course the extra torque seems quite appealing!
So I ordered the engine and it should be here next week.
I have yet to get the axles and figure out what I will be doing with the wiring.
These are the few things I will be installing with the engine.
competition ultralight flywheel
competition stage 2 clutch kit
ESP header
Greddy SP2 catback (tanabe now cause greddy is discontinued)
Well I don't know what else to say... oh yea, this is my first swap! I bought another hatch in case the swap took extra long. I also need my car for work so yea...
Onto the pics!
bad photo
just have the axles left
my ESP mount stuff, ESP FTW!
09/17/07
got the engine out today
will proceed to clean it up and maybe get my new subframe in
this is big for me, my first engine i ever took out, hahaha
09/25/07
yesss, finally picked it up today
it was a pain in the ass, i had to go to customs at some random building then to another warehouse to pick the engine up >.<
thumbs up to Hmotorsonline, i checked everything and it all seems good. they even took the TPS sensor off so it wouldnt get mashed... maybe every company does this? i wouldnt know
09/29/07
today me and my dad tried fitting the h22 in to get to get it positioned to weld in the passenger side mount and lemme tell ya... it is a PAIN in the ASS taking that engine in and out. you guys were right, a lil more banging here and there then i expected, nothing a torch and a good sledge hammer couldnt handle though. plan on getting that mount welded in tomorrow since after 6hrs today we finally got the engine mounted correctly. was gunna take pics but the camera wasnt working and my dad wanted to stay focused on the job. will take some tomorrow.
09/30/07
here are the pictures.
fitting the engine so we know where to put the passenger side tranny mount.
taking the mount on
the engine is really tight getting in and out but we've (my dad and i) probably taken it in and out around 6-7 times >.<
Thanks for looking, updates will come weekly maybe? Any comments welcome.