UPDATE TIME!!!!!!! YAY!!!!!!!
put in some work on the Integra this weekend. frustrating and satisfying at the same time as always.
Changed out both axles, had to replace the passenger side axle seal bc it gushed out trans fluid once i pulled the axle. So i flushed and filled the trans as well.
Painted the Skunk2 I.M. satin black.
Installed it with the Hondata I.M. gasket.
Dont know if it was already broken or if i broke it when removing the stock GSR I.M. but my knock sensor is done for. Will be getting a new one as soon as i can.
Replaced the stock fan switch with a Mishimoto fan switch.
Replaced the thermostat with a Mishimoto thermostat. Mishimoto up front, old one in the back.
I didnt like how one of the water lines to from the block to the firewall was part hose and part hardline; So i removed the line and installed a new hose without a hardline.
The new hose in place as well as a shot of the Hasport 70A rear mount that i installed this weekend.
A shot of the Mishimoto radiator hoses installed and the last pic taken that shows the ABS brake lines still in place.
Finally my original goal for the weekend got completed as well, everything else was just a side product of the project lol. ABS Deleted. Legitly. ABS system completely gone and Integra RS front brake hardlines installed with 4040 prop valve. Along with Russell stainless brakelines.
Next up is to replace both outer tie rods. Mine are currently thrashed. Then start replacing suspension parts that have worn out bushings.